Air Separation Plant
The 50TPD full liquid oxygen, nitrogen and argon plant that designed and manufactured by Suzhou Xinglu Air Separation Plant Science and Technology Development Co., Ltd. for Argentine customer has finally successfully shipped in mid-September. Affected by the pandemic, the customer did not have the conditions to receive goods. Xinglu Air Separation fully understands the customer’s real situation and saves the equipment for the customer. After several negotiations, the equipment was finally successfully delivered out and sailed to the Argentine port. The equipment has undergone an innovative structural design, and the fractionation column is assembled in sections in the factory (the length of the cold box is about 32m), and it is shipped by means of integral transportation. Compared with other
Air separation
The 22nd (2020) China International Exhibition on Gases Technology, Equipment and Application has been held in Nanjing successfully. At this exhibition, Suzhou Xinglu Air Separation Plant, as one of the exhibitors, showed many of the air separation plants and recovery equipment that XLA has designed and manufactured in recent years, which also have created huge benefits for customers. Although due to the pandemic, the flow of visitors at the exhibition has decreased, comparing with previous years. However, the customers at the Xinglu booth are still in an endless stream. The chairman of XLA was also present to communicate with new and regular customers to look forward to the future, also communicate and discuss technology with peers. The picture below shows

Full Liquid Air Separation Plant with Argon

Air separation
The liquid air separation plant designed and manufactured by Suzhou Xinglu Air Separation Plant Science and Technology Development Co., Ltd. has a market share of more than 50% in China due to its convenient operation, stable operation, low power consumption and wide applicability. After nearly 30 years of development, Xinglu has accumulated a lot of practical experience in various large, medium and small air separation plant. The following picture shows the 240TPD oxygen nitrogen argon all-liquid air separation plant designed and manufactured by our company for domestic customers. The plant has been installed and debugged and has successfully produced argon and is operating stably. Characteristics: 1. The cold box is assembled and shipped as a whole, reducing the installation time
Air separation plant Manufacturer
“All gases can be recycled.” Mr. Xue Lu, chairman of Suzhou Xinglu Air Separation Plant Science and Technology Development Co., Ltd., introduced. “But for a long time, due to the influence of technology, environmental awareness and recycling costs, the photovoltaic industry have several gaps in gas recovery. However, with environmental protection concepts raised and environmental friendliness requirements in recent years, products and market have put forward new requirements for gas recovery again.” Based on the construction scale of 2GW, 3GW, 5GW, and 10GW, XLA has developed a series of products which can not only solve environmental problems effectively, but also bring huge economic benefits to users. “If a 5GW factory put on an argon recovery and purification device, more than
Air Separation Plant
Since its establishment in 1992, Suzhou Xinglu Air Separation has been adhering to the development policy of ‘reliability, convenience, energy saving and consumption reduction’. After nearly 30 years of development, XLA keep making innovation and research and development in the fields of oxygen, nitrogen, argon and liquid air separation and also accumulated a lot of practical experience. The following is the 400TPD oxygen-nitrogen full-liquid air separation plant designed and manufactured by XLA. After a long period of stable operation, it has been highly recognized by customers! Features: 1. This air separation plant adopts nitrogen cycle process, and start-up successfully at the first time; 2. The plant fully meets the contract specifications, and the output and purity are better than customer
liquid air separation plant
The liquid air separation plant designed and manufactured by Suzhou Xinglu enjoys a high reputation at domestic and oveaseas due to its low power consumption, convenient operation and wide applicability. According to statistics, the number of all liquid air separation plant from Xinglu air separation plant has reached more than 50% in the Chinese market. After a long period stable operation of 200TPD oxygen, nitrogen and argon full liquid air separation plant designed and manufactured by Xinglu Air separation company has been put into production, it has been highly recognized by the customer. The customer personally visited our company to send the banner to express their thanks and encouragement! Features of the plant: 1.Power consumption is lower than the contract

Introduction of LNG Equipment

Air Separation Plant
Through development for almost 30 years, Suzhou Xinglu Air Separation Plant has grown into a pioneer in design and manufacture of cryogenic air separation plant in China. XLA has been granted Certificate of ISO9001, ASME, NB, “U” Certificate of Europe, New and High-tech Enterprise, Engineering Technology Research Center of Cryogenic Equipment of Jiangsu province, national postdoctoral station. XLA specializes in designing and manufacturing natural gas liquefaction equipment, cryogenic air separation plant, external circulation liquefaction equipment, off gas recovery and separation equipment, etc. The following picture shows the 300,000 Sm3/d pipeline natural gas purification and liquefaction equipment provided by Xinglu Air Separation plant for domestic natural gas liquefaction plants. The process adopts dry adsorption. Characteristics: 1. Adopting nitrogen cycle refrigeration, nitrogen

Cryogenic Nitrogen Plant

Air separation
Oriented on technology research and development, highly integrated with the needs of application industry, Suzhou Xinglu Air Separation Plant mainly focus on design and manufacture cryogenic air separation plant with products including high-purity nitrogen equipment; oxygen, nitrogen, argon gas air separation and liquid air separation plant; external circulation liquefaction equipment, off-gas recovery and separation equipment, LNG, CNG filling stations, high-purity gas purification equipment, etc. With the development of economy, as a protective gas during production process, usage amount of nitrogen is now growing, so as users of nitrogen generators. Combined with the current usage condition of nitrogen generators, they are widely used in following industry : ●Oil and natural gas industry ●Chemical industry ●Steel industry ●Elaboration processing ●Rubber industry ●Metallurgical

900TPD Air Separation Plant

Air separation
Usage: coal gasification Output year: 2016 Air separation plants, as one of important equipment in coal chemical industry, could provide necessary raw material gas and transports oxygen, nitrogen and air. Obviously, in this industry, a reasonable air separation process plays a vital role. Not only energy consumption but also total investment could be reduced. What’s more, a good air separation process could ensure a stable and reliable raw gas source for the coal gasification process. The following picture shows the 900TPD air separation plant provided by XLA for customers in coal gasification industry, manifesting these advantages well. Characteristics: 1.Modular design, module assembly at Jobsite, easy installation. 2.Adopt round cold box structure skid block to design and manufacture (see in following
Air separation
Jobsite: Mexico Output year: 2015 Since its establishment in 1992, Suzhou Xinglu Air Separation Equipment Technology Development Co., Ltd. has been committed to the research and development of cryogenic technology. Our plants have been exported to more than 40 countries and regions, maintaining good and stable cooperative relationship with many companies, such as Air Product, Messer, Linde, etc. Our equipment also gained great reputation from many domestic and foreign customers for its stable operation and high output efficiency. Following picture shows the third set of air separation equipment that designed for Mexican customers—10000 level (2 sets total) internal compression oxygen equipment (with argon). After a series of operations such as design, manufacturing, and factory assembly, it travel halfway around the